MDX-540 benchtop milling machine

MDX-540 Specifications


Usable Materials Plastic, resin, wood and non-ferrous metals
XYZ-Axis Travel 500 (X) x 400 (Y) x 155 mm (Z)
Loadable workpiece size with optional rotary axis (ZCL-540) * 177.8mm Diameter x 370.8mm Length
Actual milling area is smaller
Distance From Spindle Nose to Table Maximum 254mm
Table Size 550(W) x 420mm (D)
Loadable workpiece weight At acceleration of 0.2G: maximum 12kg, 0.1G: 420kg, 0.05G: 20kg
XYZ-axis drive system AC servo motor, 60W
Operating speed Maximum 295ipm (7.5m/min)
Acceleration 0.2G, 0.1G, 0.05G
Software resolution RML-1 mode: 0.0004"(0.01mm ), NC-code mode: 0.001mm
Mechanical resolution 0.001mm
Positioning accuracy +/-0.1mm/300mm, under no-load conditions
Repeat accuracy +/-0.05mm, under no-load conditions
Origin reproducibility (when the power is switched on/off) +/-0.05mm
Spindle motor DC brushless motor, maximum 400W
Spindle speed 400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering
Tool chuck Collet method, maximum tool diameter: 10mm
Control command sets RML-1 and NC codes
Interface USB (compliant with Universal Serial Bus Specification Revision 1.1)
Power supply Voltage and frequency: AC 100 to 120 V/220 to 240 V +/-10%, 50/60 Hz
Required power capacity: 7A (100 to 120V)/4A (220 to 240V)
Power consumption Approx. 700W
Acoustic noise level During operation (no cutting): 65dB (A) or less, during standby: 40dB (A) or less (according to ISO 7779)
Dimensions Width x depth x height: 745 x 955 x 858mm
Weight 102kg (225lb)
Operating temperature 41 to 104F (5 to 40C)
Operating humidity 35 to 80% (no condensation)
Included items

Handy panel, power cord, tool sensor, sensor cable, nut, nut wrench, wrench, hexagonal wrenches, Roland Software CD-ROM, SRP Player CD-ROM, User's Manual, Roland Software Guide, SRP Player Installation and Setup Guide, and NC Code Reference Manual


 -  Specifications, designs and dimensions listed may be subject to change without notice.