Metal printer FAQ

MPX-90

Can I use the Center Vise on the table?

Yes, however it is not the correct way because the print quality is not assured. When the Center Vise is on the table, the loadable thickness of a material will be shorter than the specifications.

MPX-80

Can the Head Manager for MPX-70 be used for MPX-80.

No, the Head Manager for MPX-70 only works for MPX-70.

 

MPX-70

Following error message appears when the Head Manager runs on Windows Vista.

"OpenLanMon ::GetPrinterData(I0CTL_PAR_QUERY_DEVICE_ID) R 2 The system cannot find the file specific"

See the error message.
If you try to install the driver which is not compatible with Windows Vista, some unnecessary files can remain in the system and that can cause the error. Please refresh the MPX-70 driver by following the steps below.

** Please note it is not necessary to re-install the Head Manager.
Disconnect the USB cables of all the USB-connected printers including the MPX-70 from the PC.
Refer to the readme file which can be downloaded together with the MPX-70 driver for Vista, and uninstall the driver.
Restart Windows.
From Windows menu, choose "Control Panel" > "Classic View" > "System" > "Device Manager"
Open the tree of "Universal Serial Bus controller".
Connect the MPX-70 to the PC and turn it on. "USB print support"will appear.
Right-click on USB print support and choose "delete"
Turn the MPX-70 off and on again. Plug& Play installer starts.
Specify the place of the driver files which is compatible to Windows Vista.
After installation completes, restart MPX-70 Head manager.

 

Can the Head Manager for MPX-80 be used for MPX-70

No, the Head Manager for MPX-80 only works for MPX-80.